1 Kings 7:26-34
New American Standard Bible
27Then he made the ten stands of bronze; the length of each stand was four cubits, its width four cubits, and its height was three cubits.
28This was the design of the stands: they had borders, that is, borders between the crossbars,
29and on the borders which were between the crossbars were lions, oxen, and cherubim; and on the crossbars there was a pedestal above, and beneath the lions and oxen were wreaths of hanging work.
30Now each stand had four bronze wheels with bronze axles, and its four feet had supports; beneath the basin were cast supports with wreaths at each side.
31And its opening inside the crown at the top was a cubit, and its opening was round like the design of a pedestal, a cubit and a half; and on its opening also there were engravings, and their borders were square, not round.
32The four wheels were underneath the borders, and the axles of the wheels were on the stand. And the height of a wheel was a cubit and a half.
33The workmanship of the wheels was like the workmanship of a chariot wheel. Their axles, their rims, their spokes, and their hubs were all cast.
34Now there were four supports at the four corners of each stand; its supports were part of the stand itself.
King James Version
27And he made ten bases of brass; four cubits was the length of one base, and four cubits the breadth thereof, and three cubits the height of it.
28And the work of the bases was on this manner: they had borders, and the borders were between the ledges:
29And on the borders that were between the ledges were lions, oxen, and cherubims: and upon the ledges there was a base above: and beneath the lions and oxen were certain additions made of thin work.
30And every base had four brasen wheels, and plates of brass: and the four corners thereof had undersetters: under the laver were undersetters molten, at the side of every addition.
31And the mouth of it within the chapiter and above was a cubit: but the mouth thereof was round after the work of the base, a cubit and an half: and also upon the mouth of it were gravings with their borders, foursquare, not round.
32And under the borders were four wheels; and the axletrees of the wheels were joined to the base: and the height of a wheel was a cubit and half a cubit.
33And the work of the wheels was like the work of a chariot wheel: their axletrees, and their naves, and their felloes, and their spokes, were all molten.
34And there were four undersetters to the four corners of one base: and the undersetters were of the very base itself.
Christian Standard Bible
27Then he made ten bronze water carts. Each water cart was 6 feet long, 6 feet wide, and 4½ feet high.
28This was the design of the carts: They had frames; the frames were between the cross-pieces,
29and on the frames between the cross-pieces were lions, oxen, and cherubim. On the cross-pieces there was a pedestal above, and below the lions and oxen were wreaths of hanging work.
30Each cart had four bronze wheels with bronze axles. Underneath the four corners of the basin were cast supports, each next to a wreath.
31And the water cart’s opening inside the crown on top was eighteen inches wide. The opening was round, made as a pedestal twenty-seven inches wide. On it were carvings, but their frames were square, not round.
32There were four wheels under the frames, and the wheel axles were part of the water cart; each wheel was twenty-seven inches tall.
33The wheels’ design was similar to that of chariot wheels: their axles, rims, spokes, and hubs were all of cast metal.
34Four supports were at the four corners of each water cart; each support was one piece with the water cart.
New Living Translation
27Huram also made ten bronze water carts, each 6 feet long, 6 feet wide, and 4 1/2 feet tall.
28They were constructed with side panels braced with crossbars.
29Both the panels and the crossbars were decorated with carved lions, oxen, and cherubim. Above and below the lions and oxen were wreath decorations.
30Each of these carts had four bronze wheels and bronze axles. There were supporting posts for the bronze basins at the corners of the carts; these supports were decorated on each side with carvings of wreaths.
31The top of each cart had a rounded frame for the basin. It projected 1 1/2 feet above the cart’s top like a round pedestal, and its opening was 2 1/4 feet across; it was decorated on the outside with carvings of wreaths. The panels of the carts were square, not round.
32Under the panels were four wheels that were connected to axles that had been cast as one unit with the cart. The wheels were 2 1/4 feet in diameter
33and were similar to chariot wheels. The axles, spokes, rims, and hubs were all cast from molten bronze.
English Standard Version
27He also made the ten stands of bronze. Each stand was four cubits long, four cubits wide, and three cubits high.
28This was the construction of the stands: they had panels, and the panels were set in the frames,
29and on the panels that were set in the frames were lions, oxen, and cherubim. On the frames, both above and below the lions and oxen, there were wreaths of beveled work.
30Moreover, each stand had four bronze wheels and axles of bronze, and at the four corners were supports for a basin. The supports were cast with wreaths at the side of each.
31Its opening was within a crown that projected upward one cubit. Its opening was round, as a pedestal is made, a cubit and a half deep. At its opening there were carvings, and its panels were square, not round.
32And the four wheels were underneath the panels. The axles of the wheels were of one piece with the stands, and the height of a wheel was a cubit and a half.
33The wheels were made like a chariot wheel; their axles, their rims, their spokes, and their hubs were all cast.
34There were four supports at the four corners of each stand. The supports were of one piece with the stands.
New International Version
27He also made ten movable stands of bronze; each was four cubits long, four wide and three high.
28This is how the stands were made: They had side panels attached to uprights.
29On the panels between the uprights were lions, bulls and cherubim—and on the uprights as well. Above and below the lions and bulls were wreaths of hammered work.
30Each stand had four bronze wheels with bronze axles, and each had a basin resting on four supports, cast with wreaths on each side.
31On the inside of the stand there was an opening that had a circular frame one cubit deep. This opening was round, and with its basework it measured a cubit and a half. Around its opening there was engraving. The panels of the stands were square, not round.
32The four wheels were under the panels, and the axles of the wheels were attached to the stand. The diameter of each wheel was a cubit and a half.
33The wheels were made like chariot wheels; the axles, rims, spokes and hubs were all of cast metal.
New King James Version
27He also made ten carts of bronze; four cubits was the length of each cart, four cubits its width, and three cubits its height.
28And this was the design of the carts: They had panels, and the panels were between frames;
29on the panels that were between the frames were lions, oxen, and cherubim. And on the frames was a pedestal on top. Below the lions and oxen were wreaths of plaited work.
30Every cart had four bronze wheels and axles of bronze, and its four feet had supports. Under the laver were supports of cast bronze beside each wreath.
31Its opening inside the crown at the top was one cubit in diameter; and the opening was round, shaped like a pedestal, one and a half cubits in outside diameter; and also on the opening were engravings, but the panels were square, not round.
32Under the panels were the four wheels, and the axles of the wheels were joined to the cart. The height of a wheel was one and a half cubits.
33The workmanship of the wheels was like the workmanship of a chariot wheel; their axle pins, their rims, their spokes, and their hubs were all of cast bronze.
34And there were four supports at the four corners of each cart; its supports were part of the cart itself.
